Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in the exploded view diagram.

Slide off the passenger saddle (7), from the front retainer element pushing it forward and lift it up to remove it.

To remove the side panels, it is necessary to remove the rider saddle (1) as described previously.

Unscrew the bolts (13) and (16) securing the right (12) and left (8) side panels to the rear subframe, and recover the washers (10) and (9).

Place tail guard (23) and (24) on the vehicle by starting the upper retaining screws (26) and (27) and the lower retaining screws (25).

Start and tighten the screws (25) to a torque of 10 Nm ± 10% and screws (23) and (24) to a torque of 5 Nm ± 10% (Sect. 3 - 3, Frame torque settings).

Fasten the right (12) and left (8) side panels inserting the screws (16) and left (13) with the washers (9) and (10).

Start and tighten the screws (13) to a torque of 4 Nm ± 10% and screws (16) to a torque of 2 Nm ± 10% (Sect. 3 - 3, Frame torque settings).