Air intake

7 -	Air intake

1	Air filter

2	Right air scoop

3

4	Air temperature sensor

5

6

7	Sealing washer

Spare parts catalogue


1200 ABS	AIR INTAKE - OIL BREATHER
1200 S ABS	AIR INTAKE - OIL BREATHER

Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in the exploded view diagram.

Removal of the air filters


Operation	Section reference
Remove the panel	5 - 1, Removing the panel
Remove the seat	5 - 3, Removal of the seat
Remove the front half-fairings	5 - 2, Removing the front half-fairing
Remove the tank covers	5 - 2, Removal of the fuel tank fairings
Remove the fuel tank	8 - 2, Removal of the fuel tank

On the right side, undo and remove the three fixing screws (3).

Remove the air duct (2) with the seal (7).

Remove the air filter (1).

Refitting the air filters

Apply universal sealant in the air duct (2) grooves (A).

Fit seal (7) in the groove (A) having care to place it correctly in the relevant seat so as to avoid abnormal wrinkles.

Position the air filter (1) in its seat.

Position the air duct (2) with the seal (7).

Apply the recommended threadlocker to the screws (3).

Position and tighten the three fixing screws (3) to the torque of 5 Nm± 10% (Sect. 3 - 3, Frame torque settings).


Operation	Section reference
Refit the fuel tank	8 - 2, Refitting the fuel tank
Refit the fuel tank covers	5 - 2, Refitting the fuel tank fairings
Refit the front half-fairings	5 - 2, Refitting the front half-fairing
Refit the seat	5 - 3, Refitting the seat
Refit the panel	5 - 1, Refitting the panel