Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in the exploded view diagram.

Insert pipe (4) in tank (1) by matching the pin (A) present in the inner side of the pipe with slot (B) of fitting (C); orient the clamp (3) as indicated and tighten it to a torque 1.5 Nm ± 10% (Sect. 3 - 3, Frame torque settings).

Connect the pipe (4) to the blow by tightening the clamp (5) to a torque of 1.5 Nm ± 10% (Sect. 3 - 3, Frame torque settings).